DGS-F1006P-E 4GE PoE+ 1GE & 1 SFP Uplink 250m PoE Switch

DGS-F1006P-E

Features

The D-Link DGS-F1006P-E 4 Port Switch with 10/100/1000Mbps and 1 GE & 1 SFP Ports enables you to connect Power over Ethernet (PoE) devices such as wireless access points (APs), IP cameras, and IP phones to the network.

The DGS-F1006P-E can also connect other Ethernet devices like computers, printers and a Network Attached Storage (NAS) to fit into any type of network application.

High-Speed Networking

• 4 10/100/1000 Mbps Ethernet ports

• Full/half-duplex for Ethernet/Fast Ethernet/Gigabit

• 1 GE & 1 SFP Uplink Functions

• VLAN

• EXTEND

• PoE

• QoS Easy Setup

• Plug-and-play installation

• Auto MDI/MDI-X crossover on all ports PoE Functionality

• 4 GE PoE ports

• 1 GE & 1 SFP port

• IEEE 802.3af/at compliant

• 60W total power budget

• Up to 30 W power output per PoE port

Power over Ethernet

DGS-F1006P-E features four 10/100/1000 BASE-T ports that Support the IEEE 802.3af and IEEE 802.3at PoE protocols, supplying up to 30W on each PoE port and Port 1-4 can support up to 250m, 1 GE and 1 SFP providing a total power budget of 60W.

You can connect compatible devices to the DGS-F1006P-E without using an additional power supply. This allows you to save on cabling and to install devices in locations without immediate access to power outlets.

DGS-F1006P-E  High Performance

The DGS-F1006P-E features plug-and-play installation and requires no configuration.

Auto MDI/MDI-X support on all ports removes the need for crossover cables when connecting to another switch or hub, and auto-negotiation on each port intelligently adjusts the port speed for compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DGS-F1006P-E maximizes network performance while minimizing the transmission of bad network packets.